optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 1 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. rohs features: ? 0.125? (3.175 mm) slot width ? choice of aperture (0.050? or 0.010? width) ? choice of opaque or ir transmissive shell material ? choice of mounting configurations ? choice of lead spacing or wires description: each device in this series provides the flexibility of a cu stom device from a standard product line. building from a standard housing with a 0.125? (3.18 mm) wide slot, a user can choose aperture width, opaque or ir transmissive housing shell material, pcboard lead spacing or wires and mounting tab configuration. housings are made from an opaque grade of injection-mol ded plastic to minimize sensitivity to both visible and near-infrared light. discrete shells exposed on the paralle l faces inside each device?s throat are made from either ir transmissive plastic (for applications where dust pr otection is needed) or from opaque plastic with aperture openings (for applications that require maximum protection against ambient light). phototransistor sensor devices include the opb859 , opb360 , opb370 , opb380, opb390 , opb860 and opb870 , while the opb355 provides a photodiode sensor. the photodiode sensor has a lower and more linear output-versus-light input than the phototransistor models. the opb355, opb360, opb370, opb859, opb860 and opb870 are designed for direct connection to through hole pcboards. the opb380, opb390, opb880 and opb890 have 26 awg, ul approved wires connected directly to the device for remote sensing applications. custom electrical, wire and cabling and connectors are ava ilable. contact your local representative or optek for more information. product photo here applications: ? non-contact object sensing ? assembly line automation ? machine automation ? equipment safety ? machine safety opb360, opb370, opb380, opb390 opb859 opb860, opb870, opb880, opb890 2 4 1 3 contains polysulfone to avoid stress cracking, we suggest using nd industries? vibra-tite for thread-locking. vibra-tite evaporates fast without causing structural failure in optek?s molded plastics. applies to: opb360, opb370, opb380, opb390 and opb860, opb870, opb880, opb890. opb355 2 4 1 3 ?n? ?l? ?p? ?t? color # description 1 red 2 black 3 white 4 green wire colors
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 2 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. part number guide ? opb360 / opb370 opb 3 x x x x x optek assembly sensor aperture: 1 ? 0.010? (0.254 mm) 5 ? 0.050? (1.270 mm) phototransistor output family emitter aperture: 1 ? 0.010? (0.254 mm) 5 ? 0.050? (1.270 mm) discrete shell material: mounting configurations: 6 ? base mount ir transmissive l ? emitter side mounting tab only polysulfone discrete shell n ? no mounting tabs pcmountable leads p ? sensor side mounting tab only 7 ? base mount opaque t ? two mounting tabs plastic discrete shell pcmountable leads lead spacer designator: 0 = 0.320? (8.12 mm) lead space 5 = 0.220? (5.59 mm) lead space part number guide ? opb355 opb 3 x x x optek assembly mounting configurations: n ? no mounting tabs l ? emitter side mounting tab only photodiode output family p ? sensor side mounting tab only t ? two mounting tabs part number guide ? opb380 / opb390 opb 3 x 0 x x x z optek assembly rohs compliant sensor aperture: 1 ? 0.010? (0.254 mm) phototransistor output family 5 ? 0.050? (1.270 mm) emitter aperture: 1 ? 0.010? (0.254 mm) discrete shell material: 5 ? 0.050? (1.270 mm) 8 ? base mount ir transmissive polysulfone discrete shell pcmountable leads mounting configurations: l ? emitter side mounting tab only 9 ? base mount opaque plastic discrete shell n ? no mounting tabs pcmountable leads p ? sensor side mounting tab only t ? two mounting tabs
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 3 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. part number guide ? opb860 / opb870 opb 8 x x x x x optek assembly sensor aperture: 1 ? 0.010? (0.254 mm) 5 ? 0.050? (1.270 mm) phototransistor output family emitter aperture: 1 ? 0.010? (0.254 mm) 5 ? 0.050? (1.270 mm) discrete shell material: mounting configurations: 6 ? base mount ir transmissive n ? no mounting tabs plastic discrete shell l ? emitter side mounting tab only pcmountable leads t ? two mounting tabs 7 ? base mount opaque p ? phototransistor side mounting side plastic discrete shell pcmountable leads electrical specification variations: 0 = electrical parameter a (lead spacing = 0.320?) 1 = electrical parameter b (lead spacing = 0.320?) 2 = electrical parameter c (lead spacing = 0.320?) 5 = electrical parameter a (lead spacing = 0.220?) 6 = electrical parameter b (lead spacing = 0.220?) 7 = electrical parameter c (lead spacing = 0.220?) note: assemblies with dual 0.010? apertures are currently available with electrical parameter ?a? only. part number guide ? opb880 / opb890 opb 8 x x x x x z optek assembly rohs compliant sensor aperture: 1 ? 0.010? (0.254 mm) phototransistor output family 5 ? 0.050? (1.270 mm) emitter aperture: 1 ? 0.010? (0.254 mm) discrete shell material: 5 ? 0.050? (1.270 mm) 8 ? base mount ir transmissive plastic discrete shell mounting configurations: 9 ? base mount opaque l ? emitter side mounting tab only plastic discrete shell n ? no mounting tabs p ? phototransistor side mounting side t ? two mounting tabs electrical specification variations: 0 = electrical parameter a 1 = electrical parameter b 2 = electrical parameter c note: assemblies with dual 0.010? apertures are currently available with electrical parameter ?a? only. wires = 26awg?24? long, ul approved part number guide ? opb859 opb 8 5 9 optek assembly emitter aperture: 0.050? (1.270 mm) sensor aperture: 0.050? (1.270 mm) mounting configuration: phototransistor output family t ? two mounting tabs
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 4 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb859 opb880, opb890 pin # emitter pin # transistor/diode 1 anode 3 collector / anode 2 cathode 4 emitter / cathode e / clear top denotes led s / black top denotes sensor dimensions are in: inches [ millimeters] opb355, opb360, opb370, opb860, opb870 opb380, opb390
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 5 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. absolute maximum ratings (t a =25c unless otherwise noted) storage temperature (1) (2) opb355, opb360, opb370, opb 859, opb860, opb870 series opb380, opb390, opb880, opb890 series -40 c to +100 c -40 c to +85 c operating temperature (1) (2) -40 c to +85 c lead soldering temperature (7) 260 c input led forward dc current opb355, opb360, opb370, o pb380, opb390, opb859, opb 860, opb870, opb880, opb890 50 ma peak forward current (1s pulse width, 300 pps) 1 a reverse dc voltage 2 v power dissipation (2) 75 mw output phototransistor/diode cathode-anode reverse voltage -opb355 60 v emitter-collector voltage 5 v collector dc current 30 ma power dissipation (1) 100 mw collector-emitter voltage opb360, opb370, opb380, o pb390, opb859, opb860, opb870, opb880, opb890 series 30 v notes: (1) for wire series (opb380, opb390, opb880 and opb890), maximum storage and operating temperature is limited by the temperature rating of the lead wires. (2) derate linearly 1.67 mw/ c above 25 c. (3) for opb355, opb360 and opb370, polarity is denoted by color of housing top: led (clear); sensor (black). (4) cleaning agents methanol and isopropanol are recommended. spray or wipe; do not submerge. (5) opb380 and opb390 wire terminations have 24? of 7-strand 26 awg ul approved insulated wire on each terminal. these devices incorporate a wire strain relief at the housing surface. the insulation colors and functions are: ired anode (red); i red cathode (black); phototransistor collector (white); phototransistor emitter (green). (6) rma flux is recommended. duration can be exten ded to 10 seconds maximum when flow soldering. (7) all parameters were tested using pulse technique.
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 6 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. electrical characteristics (t a = 25 c unless otherwise noted) symbol parameter min typ max units test conditions input transistor/diode (see op240 for additional information?for reference only) v f forward voltage - 1.3 1.8 v i f = 20 ma i r reverse current - - 100 a v r = 2 v output diode ? opb355 (see opb950 for additional information ? for reference only) v br reverse diode breakdown voltage 60 - - v i r = 100 a, i f = 0, e e = 0 v fd forward voltage photodiode - - 1.2 v i f = 1 ma, i f = 0, e e = 0 id reverse dark current - - 60 na v r = 30 v, e e = 0, i f = 0 output transistor (see op550 for additional information?for reference only) v (br)ceo collector-emitter breakdown voltage 30 - - v i c = 1 ma v (br)eco emitter-collector breakdown voltage 5 - - v i e = 100 a i ceo collector-emitter dark current - - 100 na v ce = 10 v, i f = 0, e e = 0 coupled i l on-state collector current opb355 (l, n, p, t) 10 - 200 a v r = 5 v, i f = 40 ma v ce(sat) collector-emitter sa turation voltage opb859 opb860/870/865/875 (para. a) opb861/871/866/876 (para. b) opb862/872/867/ 877 (para. c) opb880/890/ (para. a) opb881/891 (para. b) opb882/892 (para. c) - - - - - - - - - - - - - - 0.4 0.4 0.4 0.6 0.4 0.4 0.6 v i c = 125 a, i f = 20 ma i c = 400 a, i f = 20 ma i c = 800 a, i f = 20 ma i c = 1800 a, i f = 20 ma i c = 400 a, i f = 20 ma i c = 800 a, i f = 10 ma i c = 1800 a, i f = 20 ma on-state collector current opb36x, opb37x (t, n, l, p 11) opb36x, opb37x (t, n, l, p 51) opb36x, opb37x (t, n, l, p 55) opb38x, opb39x (t, n, l, p 11) opb38x, opb39x (t, n, l, p 51) opb38x, opb39x (t, n, l, p 55) 1.0 2.5 3.5 1.0 2.5 3.5 - - - - - - 5 10 14 5 10 14 ma v ce = 0.4 v, i f = 20 ma opb859 250 - - a v ce = 10 v, i f = 20 ma opb860/870/865/875 (para. a) opb861/871/866/876 (para. b) opb862/872/867/ 877 (para. c) opb880/890/ (para. a) opb881/891 (para. b) opb882/892 (para. c 0.5 1.0 1.8 0.5 1.0 1.8 - - - - - - - - - - - - ma v ce = 10 v, i f = 20 ma v ce = 5 v, i f = 10 ma v ce = 0.6 v, i f = 20 ma v ce = 10 v, i f = 20 ma v ce = 5 v, i f = 10 ma v ce = 0.6 v, i f = 20 ma i c(on)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 7 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb355 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c (on) response (ma) left to righ t right to left to p to bottom opb355 - flag next to sensor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c (on) response (ma) left to ri g ht right to left to p to bottom opb355 - flag next to emitter 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c (on) response (ma) left to right right to left to p to bottom emitter sensor left to right right to left 0 width top to bottom 0
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 8 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb370t11 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 diisplacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom opb370t11 - flag next to emitter 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom aperture configuration 11 - flag next to emitter opb370t11 - flag next to sensor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to ri g ht right to left to p to bottom aperture configuration 11 - flag next to sensor aperture configuration 11 - flag in middle of slot emitter sensor left to right right to left 0 width top to bottom 0
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 9 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb370n51 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom aperture configuration 51 - flag next to emitter opb370n51 - flag next to sensor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to ri g h t right to left to p to bottom aperture configuration 51 - flag next to sensor opb370n51 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom aperture configuration 51 - flag in middle of slot emitter sensor left to right right to left 0 width top to bottom 0
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.8 5/09 page 10 of 10 slotted optical switch opb355, opb360, opb370, opb380, opb390 opb859, opb860, opb870, opb880, opb890 series optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb380t55 - flag next to emitter 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom aperture configuration 55 - flag next to emitter opb380t55 - flag next to sensor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom aperture configuration 55 - flag next to sensor opb380t55 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) typical i c(on) response (ma) left to righ t right to left to p to bottom aperture configuration 55 - flag in middle of slot emitter sensor left to right right to left 0 width top to bottom 0
|
